  | October 20, 2009
ConProTec introduces its Mixpac S-50 System for two-component adhesive dispensing. When used with DTIC's electric hand-held adhesive dispenser, the new system can accommodate the standard Mixpac System with volumetric ratios of 1:1, 2:1, 4:1 and 10:1 and also the new Mixpac S50 System with an additional ratio of 3:2.
 |
 | July 9, 2009
LORD Corp. launches LORD Fusor 115, a medium-set plastic finishing adhesive with a longer open time in hot weather, according to the company.
|
 | June 23, 2009
Pres-On introduces a semi-closed cell crushed EPDM tape that combines the flexibility of a standard open cell foam tape with the sealing qualities of closed cell foam tapes, according to the company.
|
 | December 17, 2008
Made of lightweight, 6061-T6 aluminum, brass valves and stainless steel ball bearings, Jiffy-tite Quick-Connect Fluid Fittings are designed for an extra long life, the company states. The Quick-Connect style fitting can be connected in seconds with no tools.
|
 | October 20, 2008
The Strouse Corporation, a manufacturer of adhesive masking and foam tapes for the automotive industry, has added a Class 10,000 Clean Room to its manufacturing capabilities with four state-of-the-art presses in the room.
|
 | October 20, 2008
A free instructional DVD that demonstrates collision repair techniques for heavy-duty trucks using PLIOGRIP by Valvoline body repair system is available.
|
 | October 20, 2008
Paintable in 10 minutes, LORD Fusor 802EZ Factory Match Seam Sealer from LORD Corporation is a 100-percent urethane-based, automotive sealer/adhesive.
|
 | October 20, 2008
LORD Corporation's LORD Fusor 116 (Medium) and Fusor 117 (Slow) plastic to metal cross-bonding adhesives are designed to bond many types of rigid plastic to bare metal.
|
| 
